skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the gearbox > < Removing and installing the selector lever sensor control unitJ587

Octavia Mk2

Check the plug connections at the gearshift mechanism (Octavia II, Superb II)
Check the plug connections at the gearshift mechanism (Octavia II, Superb II)
Before repairing or checking the plug connections, try to determine the origin of the damage via the „targeted fault finding“ using the → Vehicle diagnostic tester.
Before checking the plug connections, all control units in the vehicle should be checked with the → Vehicle diagnostic tester, if necessary the faults must be rectified.
   
–  Check plug connections → Current flow diagrams, Electrical fault finding and Fitting locations.
A - 10-pin plug for connection lines from the gearshift mechanism to the gearbox (with CAN databus lines)
B - 4-pin plug to selector lever lock solenoid -N110-, selector lever sensor control unit -J587- and selector lever switch locked in P -F319-
C - 10-pin plug to lamp for selector lever scale illumination -L101- in the cover for the shift mechanism
  Note
As of production date 06.09 the shift mechanism is changed, the 4-pin plug connection -B- and the selector lever lock solenoid -N110--1- are already located in the shift mechanism → Chapter.
  S37-0198

Removing and installing the gearbox > < Removing and installing the selector lever sensor control unitJ587