Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing the pump for Haldex coupling (final drive "02D/0AV") (Octavia II)|Install >
< Removing and installing the pump for Haldex coupling (final drive "02D/0AV") (Octavia II)
Octavia Mk2
Power transmission
Gearbox 02Q
Final drive, differential, differential lock
Electrical/electronic components and fitting locations for the Haldex coupling / moving_and_installing_the_pump_for_haldex_coupling_(final_drive_quot;02d/0avquot;)_(octavia_ii)/">Removing and installing the pump for Haldex coupling (final drive "02D/0AV") (Octavia II)
Removing
Removing
Removing
–
Switch off ignition.
–
Place catch pan under the final drive.
–
Unscrew screw
-B-
for oil inspection.
–
Unscrew oil drain plug
-A-
and completely drain high efficiency oil for Haldex coupling.
–
Screw in new oil drain plug
-A-
using a new sealing ring and tighten to 30 Nm.
–
Slightly lower final drive, to do so the fixing screw must be released approx. 7 times at the front bracket-final drive.
–
Disconnect plug
-arrow-
for the pump from the control unit.
–
Pull out wiring loom together with the holder
-A-
from the housing and expose.
–
Compress catch pegs
-B-
and push as far as possible into the housing hole.
–
Screw out the fixing screws of the pump
-1-
.
–
Pull pump
-arrow-
together with cable protection
-2-
out of the Haldex housing.
Power transmission
Gearbox 02Q
Final drive, differential, differential lock
Electrical/electronic components and fitting locations for the Haldex coupling / moving_and_installing_the_pump_for_haldex_coupling_(final_drive_quot;02d/0avquot;)_(octavia_ii)/">Removing and installing the pump for Haldex coupling (final drive "02D/0AV") (Octavia II)
Removing
Removing and installing the pump for Haldex coupling (final drive "02D/0AV") (Octavia II)|Install >
< Removing and installing the pump for Haldex coupling (final drive "02D/0AV") (Octavia II)