| „Final drive 02D/0AV“ - Functional test for opened Haldex coupling on vehicles fitted with manual gearbox (Octavia II) |
| t
| Oil level of the Haldex coupling is O.K. |
| t
| Check oil level in the Haldex coupling → Chapter |
| t
| Correctly fitted engine control unit and ABS control unit (check coding and control unit identification number) |
Note | For safety reasons, the vehicle must be placed on the lifting platform in such a way that the wheels have no contact with the ground. Proceed carefully when inspecting. |
| –
| Engage 1st gear and drive off slowly. |
| Now all 4 wheels must turn. |
| The rear wheels must come to a standstill, while the front wheels continue to turn. |
| l
| If the rear wheels do not turn: |
| The Haldex coupling is open, the function is O.K. |
| l
| If the rear wheels turn: |
| The Haldex coupling is closed. Possible cause of fault: |
| t
| Main pressure regulating valve can clamp. |
| t
| Mechanical fault of the Haldex coupling. |
| t
| Four-wheel drive control unit -J492- on rear final drive is defective. |
| t
| Handbrake warning switch -F9- is defective. |
|
|
|
