skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing gasket ring for right flange shaft (vehicles with front-wheel drive)|Install > < Replacing gasket ring for right flange shaft (vehicles with front-wheel drive)

Octavia Mk2

Removing
Removing
–  Remove the sound dampening system → Body Work; Rep. gr.50.
   
–  Remove heat shield for right drive shaft (if present) from the engine -arrows-.
  S39-0282
–  Unscrew the right drive shaft from the flange shaft -A- of the gearbox → Chassis; Rep. gr.40
–  Tie up the drive shaft as far as possible. Avoid damaging the paintwork on the drive shaft during this operation.
–  Position the catch pan under the gearbox.
–  Release the fixing screw for the right flange shaft, to this end insert two screws in the flange and counterhold the flange shaft using an assembly lever.
–  Remove the flange shaft with pressure spring.
–  Lever out gasket ring with assembly lever.
  S34-0891

Replacing gasket ring for right flange shaft (vehicles with front-wheel drive)|Install > < Replacing gasket ring for right flange shaft (vehicles with front-wheel drive)