Output shaft 5th, 6th gear/reverse gear |
Disassembling and assembling output shaft 5th/6th gear and reverse gear → Chapter |
Adjusting output shaft 5th, 6th gear/reverse gear → Chapter |
Special tools and workshop equipment required |
t
| Pressure plate -MP3-406 (VW 401)- |
t
| Pressure plate -MP3-407 (VW 402)- |
t
| Pressure spindle -MP3-408 (VW 412)- |
t
| Thrust piece -MP3-410 (VW 434)- |
t
| Thrust piece -MP3-411 (VW 454)- |
t
| Press-on sleeve -MP3-412 (VW 455)- |
t
| Pressure washer -MP3-413 (VW 510)- |
t
| Pressure spindle -MP3-423 (VW 407)- |
t
| Pressure spindle -MP3-448 (VW 408)- |
t
| Pipe section -MP3-450 (VW 415A)- |
t
| Thrust piece -MP3-453 (VW 431)- |
t
| Alignment rails -MP3-457 (VW 457)- |
t
| Pipe section -MP3-461 (VW 519)- |
t
| Thrust plate -MP3-467 (40-105)- |
t
| Thrust piece -MP3-4014 (VW 432)- |
t
| Washer -MP6-415 (3260)- |
t
| Assembly stand -MP9-101- |
t
| Gearbox mount -T30109 (VW 353)- |
t
| Retaining plate -T30027 (VW 801)- |
t
| Thrust piece -T30042 (2050)- |
t
| Thrust piece -T30091 (40 - 202)- |
t
| Tapered-roller bearing extractor -V.A.G 1582- |
t
| Separating device, e.g. -Kukko 17/2- |
t
| Interior extractor, e.g. -Kukko 21/7- |
t
| Countersupport e.g. -Kukko 22/2- |
|
|
|