Octavia Mk2
| Summary of components - Hydraulics |
| 1 - | Brake fluid reservoir |
| q | check for tightness Octavia II → Chapter |
| q | check for tightness Superb II → Chapter |
| 2 - | Spring clamp |
| q | is not installed on all vehicles |
| 3 - | Tubing |
| q | to the brake fluid reservoir |
| q | out of rubber |
| q | as of 12.05 on certain vehicles out of plastic → Fig. |
| q | if the intake hose is made out of plastic, do not use hose clamp -MP7–602- |
| q | check for tightness Octavia II → Chapter |
| q | check for tightness Superb II → Chapter |
| 4 - | Master cylinder |
| q | removing and installing → Chapter |
| q | test tightness → Chapter |
| q | check for tightness Superb II → Chapter |
| 5 - | Locking clip |
| q | to remove and install the tube-hose line pull out retaining clip up to the stop |
| 6 - | Bearings |
| q | for actuating rod of master cylinder |
| 7 - | Clutch pedal |
| q | removing and installing → Chapter |
| 8 - | 20 Nm |
| q | for bearing bracket on body |
| q | always replace → Electronic Catalogue of Original Parts |
| 9 - | O-ring |
| q | always replace → Electronic Catalogue of Original Parts |
| q | pull onto line connection |
| q | moisten with brake fluid to install |
| q | do not interchange, O-ring (Pos. 9) and gasket ring (Pos. 12) are different → Fig. |
| q | check for tightness Octavia II → Chapter |
| q | check for tightness Superb II → Chapter |
| 10 - | Tube-hose line |
| q | assign according to the → Electronic catalogue of original parts. |
| q | Remove battery and battery tray for removing → Electrical System; Rep. gr.27 |
| q | check for tightness Octavia II → Chapter |
| q | check for tightness Superb II → Chapter |
| 11 - | Support |
| q | Mounted at the structure |
| 12 - | Sealing ring |
| q | always replace → Electronic Catalogue of Original Parts |
| q | pull onto line connection |
| q | moisten with brake fluid to install |
| q | do not interchange, O-ring (Pos. 9) and gasket ring (Pos. 12) are different → Fig. |
| q | check for tightness Octavia II → Chapter |
| q | check for tightness Superb II → Chapter |
| 13 - | Locking clip |
| q | to remove and install the tube-hose line pull out retaining clip up to the stop |
| 14 - | Slave cylinder |
| q | removing and installing → Chapter |
| q | check for tightness Octavia II → Chapter |
| q | check for tightness Superb II → Chapter |
| 15 - | 20 Nm |
| 16 - | Bleed valve |
| q | Bleed the clutch system → Chapter |
| 17 - | Rubber bowl |
| 18 - | Gearbox |
| 19 - | Support |
| 20 - | 20 Nm |
|
|
|
|
