skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the four-wheel drive control unitJ492 (final drive "02D/0AV")|Install > < Removing and installing the four-wheel drive control unitJ492 (final drive "02D/0AV")

Octavia Mk2

Removing
Removing
  Note
   
When removing the control unit -1-, the cover -2- and the disc spring -5- are removed together. The pressure sensor -4- and the valve -3- are removed separately.
–  Switch off ignition.
  N39-10093
–  Separate plug connections -1- and -2- at the top of the control unit.
–  Place catch pan under the final drive.
  N39-10090
–  Release screws -arrows-.
Ensure that no parts fall down when removing the control unit.
–  Carefully remove the control unit -A-.
  A39-10049
–  Carefully grasp the valve for control of opening degree of coupling -N373--A- at the metal housing -arrow- using pliers and pull out.
–  Pull out pressure sensor -B-.
  A39-10051
–  Pull gasket ring for control valve for opening degree of coupling -N373--arrow- out of the housing.
  N39-10096

Removing and installing the four-wheel drive control unitJ492 (final drive "02D/0AV")|Install > < Removing and installing the four-wheel drive control unitJ492 (final drive "02D/0AV")