skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing the right flange shaft gasket ring (four-wheel drive)|Install > < Replacing the right flange shaft gasket ring (four-wheel drive)

Octavia Mk2

Removing
Removing
–  Loosen the front right wheel bolts.
–  Raise vehicle.
Chassis
–  Remove right front wheel → Chassis; Rep. gr.44.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Remove the front right wheelhouse liner → Body Work; Rep. gr.66.
   
–  If applicable remove cap for drive shaft -arrows-.
–  Remove drive shaft from right flange shaft and tie up as far as possible, do not damage the surface protection → Chassis; Rep. gr.40.
–  Position the catch pan under the gearbox and the engine.
  A10-10260
–  Remove the right flange shaft bolt -arrow- using the socket insert -T10107A-.
  S34-1047
–  Screw extractor -T10037- onto right flange shaft.
–  Insert pressure plate -MP3-410 (VW 434)- between gearbox support and notch nut -T10037/1-.
–  Align the extractor -T10037- with the support -A- parallel to the flange.
–  Take out the flange shaft.
–  Take out gasket ring with ejection lever -MP3-418 (VW 681)-.
  N39-0796

Replacing the right flange shaft gasket ring (four-wheel drive)|Install > < Replacing the right flange shaft gasket ring (four-wheel drive)