| Removing and installing oil pan, oil filter, slide valve body and internal wiring looms |
| Oil pan, oil strainer, slide valve body, internal wiring looms - Summary of components → Chapter. |
| Removing and installing the oil strainer → Chapter. |
| Removing and installing the slide valve body → Chapter. |
| Removing and installing wiring loom with 14-pin plug → Chapter. |
| Removing and installing wiring loom with 8-pin plug and integrated gearbox oil temperature sender -G93- → Chapter. |
| Removing and installing the gearbox input r.p.m. sender -G182- → Chapter. |
| Removing and installing the gearbox output r.p.m. sender -G195- → Chapter. |
WARNING | Do not run the engine or tow the vehicle when the oil pan has been removed or without filling with ATF. |
|
Note | t
| Always replace soiled or faulty slide valve bodies. |
| t
| Coat O-rings and gasket rings with ATF. Other types of lubricant will cause the gearbox hydraulic control system to malfunction. |
| t
| The slide valve body and the wiring looms with 8-pin and 14-pin plug can also be removed with the installed gearbox. |
|
|
|
