skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing clutch make "LuK"|Install > < Removing and installing clutch make "LuK"

Octavia Mk2

Removing
Removing
–  Remove gearbox (Octavia II) → Chapter.
–  Remove gearbox (Superb II) → Chapter.
–  Remove gearbox (Yeti) → Chapter.
In order to avoid a deformation of the pressure plate when removing it (this leads to jerking during start-up), the pressure plate must be loosened as follows:
   
–  Insert counterholder -MP1-223 (3067)- to slacken the bolts.
–  Release bolts gradually and crosswise.
–  Remove pressure plate and clutch disc.
  S30-0209

Removing and installing clutch make "LuK"|Install > < Removing and installing clutch make "LuK"