skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replace gasket ring in separated version for right flange shaft|Install > < Replace gasket ring in separated version for right flange shaft

Octavia Mk2

Removing
Removing
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Turn steering to full right lock.
   
–  If applicable remove cap for drive shaft from the engine.
  S39-0282
–  Unscrew the drive shaft -1- from the flange shaft → Chassis; Rep. gr.40.
–  Tie up the drive shaft as far as possible. Avoid damaging the paintwork on the drive shaft during this operation.
–  Position the catch pan under the gearbox and the engine.
–  If necessary, unscrew oil return-flow line for exhaust turbocharger from engine -arrow- → Engine; Rep. gr.21.
  N39-0824
–  Unscrew the fixing screw for the flange shaft, to this end insert two screws in the flange and using a tyre iron hold the shaft.
–  Remove the flange shaft with pressure spring.
  V34-2737
–  Lever out gasket ring using a screwdriver -A-, to do so support the screwdriver on a suitable base (e. g. assembly device -MP6-414 (3253)-)
  Note
t  Do not damage the bushing as this will cause leaks.
t  replace bushing if damaged → Chapter.
  S39-0279

Replace gasket ring in separated version for right flange shaft|Install > < Replace gasket ring in separated version for right flange shaft