Octavia Mk2
|
1 - | Gearshift shaft with cover |
q | (Gearshift unit) |
q | Parts cannot be separated |
2 - | Reversing light switch -F4- |
q | tighten to 20 Nm |
q | Grease peg with grease for plug serration of clutch disc -G 000 100- |
3 - | Locking bolt |
q | for setting the gearshift mechanism |
q | removing → Fig. |
q | installing → Fig. |
4 - | Reversing lever |
q | out of plastic or metal |
q | Fitting position → Chapter |
q | as of 06.07 the reversing level is plastic |
q | Removing and installing plastic relay lever together with cable lock → Chapter |
q | if the relay lever is made of plastic, neither the bushings Pos. 5 nor the lock washer Pos. 10 are required |
5 - | Bushing |
q | is not required, if the relay lever is made of plastic |
6 - | Sealing ring |
q | release with a screwdriver |
q | installing → Fig. |
7 - | 23 Nm |
q | self-locking |
q | always replace → Electronic Catalogue of Original Parts |
8 - | Gearshift lever |
q | insert in such a way that the interrupted spacing of the teeth matches the gearshift shaft → Chapter |
q | may be replaced with the gearshift mechanism mounted |
q | Fitting position → Chapter |
q | as of 06.06 the diameter of the fixing bolts is smaller → Chapter |
9 - | Cap |
q | for gearbox bleeder |
10 - | Lock washer |
q | always replace → Electronic Catalogue of Original Parts |
q | is not required, if the relay lever is made of plastic |
11 - | Screw cap |
12 - | Spring |
q | not installed on all gearboxes |
q | if present, reinstall |
|
|
|