skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing the right flange shaft seal ring|Install > < Replacing the right flange shaft seal ring

Octavia Mk2

Removing
Removing
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Turn steering to full right lock.
   
–  If applicable remove cap for drive shaft from the engine -arrows-.
–  Unscrew drive shaft from flange shaft → Chassis; Rep. gr.40.
–  Tie up the drive shaft as far as possible. Avoid damaging the paintwork on the drive shaft during this operation.
–  Position the catch pan under the gearbox.
  S39-0282
–  Release the fixing screw for the flange shaft, to this end insert two screws in the flange and counterhold the flange shaft using an assembly lever.
–  Remove the flange shaft with pressure spring.
  V34-2737
–  Remove gasket ring for flange shaft with inertia extractor -MP 9-501- and extractor -MP3-419/37-.
  S34-0606

Replacing the right flange shaft seal ring|Install > < Replacing the right flange shaft seal ring