skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Checking the assembly bracket > < Assembly bracket

Octavia Mk2

Tightening torques
Tightening torques
   
Assembly bracket - engine
A - 20 Nm + 90° (1/4 turn) - replace
B - 40 Nm + 90° (1/4 turn) - replace
C - 60 Nm + 90° (1/4 turn) - replace
  S10-0249
Assembly bracket - gearbox
A - 40 Nm + 90° (1/4 turn) - replace
B - 60 Nm + 90° (1/4 turn) - replace
  S10-0252
Pendulum support
Screw -A- strength category 8.8 = 40 Nm + torque a further 90° (1/4 turn) - replace
Screw -A- strength category 10.9 = 50 Nm + torque a further 90° (1/4 turn) - replace
Screw -B- = 100 Nm + torque a further 90° (1/4 turn) - replace
Remove: First release screw -B-, then screws -A-.
Install: First tighten screws -A-, then screw -B-.
  S10-0253

Checking the assembly bracket > < Assembly bracket