Octavia Mk2
| Intake manifold - Summary of components (for engine identification characters BUD, CGGA) |
| 1 - | Intake manifold |
| 2 - | Sealing ring |
| q | replace |
| 3 - | 7 Nm |
| 4 - | Throttle valve control unit -J338- |
| q | when replacing, adapt the engine control unit to the throttle valve control unit → Vehicle diagnostic, testing and information system VAS 5051 |
| q | Clean throttle valve control unit -J338- → Chapter |
| 5 - | Bleeder hose |
| q | from the activated charcoal filter system → Chapter |
| 6 - | Solenoid valve 1 for activated charcoal filter -N80- |
| q | attached with bracket to the intake manifold |
| q | removing and installing → Chapter |
| 7 - | Bleeder hose |
| 8 - | 20 Nm |
| 9 - | Vacuum hose |
| q | To the brake servo unit |
| 10 - | O-ring |
| q | replace if damaged |
| 11 - | Coolant hose |
| 12 - | Spring strap clamp |
| 13 - | Preheating for crankcase ventilation |
| q | remove intake manifold for removing and installing |
| 14 - | 3 Nm |
| 15 - | Pipe |
| q | to vacuum regulating valve for crankcase ventilation (for oil separator) → Chapter |
| 16 - | O-ring |
| q | replace |
| 17 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
