| Removing and installing parts of the exhaust system |
Note | t
| The decoupling element in the pre-exhaust pipe should not be bent by more than 10° - risk of damage. |
| t
| Secure the decoupling element with the transport security -T10403- against overtensioning. |
| t
| Replace the gaskets and the self-locking nuts. |
| t
| When performing installation work on the exhaust system, make sure the exhaust system is not mounted under tension and has adequate clearance from the vehicle body. If necessary, slacken the warm-type clamp and align the exhaust system so as to create all round adequate clearance to the body and so that the weight is evenly distributed over the hangers. |
|
|
|
