Privacy Policy
Donate and help keep workshop manuals freely available.
Other Skoda Workshop Service and Repair Manuals
Other Makes
Running gear
Body
Drive unit
Power transmission
Vehicle electrics
Heating, ventilation, air conditioning system
Power unit
1.4/55; 59 kW MPI engine
1.6/55; 66; 77 kW TDI CR Engine
Technical Data
Self diagnosis, V.A.G Inspection Service
Engine assy,cylinder block,crankcase
Enginecrankshaft group, pistons
Engine cylinder head, valve gear
Engine lubrication
Engine cooling
Fuel supply, gas operation
Exhaust turbocharger, G-charger
Fuel preparation system Diesel injection
Diesel direct injection system - fitting locations, system overview
Fuel system, engine side
Fuel system - Summary of components
Injection units (piezo injectors) - Summary of components and fitting position of the clamping claw
Removing and installing injection unit (piezo injector)
Removing and installing the fuel distributor
Installing the high pressure lines
Replace fuel pressure regulating valveN276
Removing and installing fuel pressure senderG247
Removing and installing the high pressure pump
Testing the pressure of the high pressure pump
Testing the return flow quantity on the high pressure pump
Check the fuel system for tightness
Check fuel pressure regulating valveN276
Checking return flow quantity of injection units
Carry out the vacuum test of the injection units
Check the pressure holding valve in the fuel return-flow line
Intake manifold, air filter
Engine control unit
Exhaust system
Ignition system, glow plug system
1,2/63; 77 kW TSI engine
2.0/81; 103; 125 kW TDI CR Engine (2nd generation)
1,6/72; 75 kW MPI engine
2.0/103; 125 kW TDI CR Engine (1st generation)