Octavia Mk2
Radiator with a radiator fan - Summary of components |
(Octavia II, Yeti) |
Note
t | This engine is fitted with a radiator combination of engine and low temperature radiators for charge air system. |
t | Engine and low temperature radiators are arranged as one component part. |
1 - | Radiator with low temperature radiator for charge air system |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
2 - | Coolant hose |
q | to exhaust gas turbocharger |
3 - | Coolant hose |
q | to low temperature radiator for charge air system |
4 - | Coolant hose |
q | to exhaust gas turbocharger |
5 - | Coolant hose |
q | to charge-air cooler in the intake manifold |
6 - | Radiator fan -V7- |
7 - | Coolant hose |
q | to coolant pipe below the intake manifold |
8 - | Coolant hose |
q | to engine oil cooler |
9 - | Expansion reservoir |
q | with coolant shortage warning light sender -G32- |
q | Check the cooling system for tightness → Chapter |
10 - | Connector |
11 - | Screw cap |
q | Testing the pressure relief valve in the cap → Chapter |
12 - | 5 Nm |
13 - | Plastic inserts |
q | for fixing screws |
14 - | Support |
15 - | Coolant hose |
q | at coolant recirculation pump -V50- |
16 - | Fan shroud |
q | removing and installing → Chapter |
q | different versions of the fan shrouds are mounted → Electronic Catalogue of Original Parts |
17 - | 5 Nm |
18 - | 5 Nm |
19 - | Coolant hose |
q | at coolant regulator housing |
20 - | Coolant hose |
q | to heat exchanger of heating system |
21 - | Connection fittings |
q | for top coolant hose |
22 - | Connection fittings |
q | for bottom coolant hose |
23 - | Retaining clip |
q | check tightness |
24 - | Coolant temperature sender at radiator outlet -G83- |
25 - | O-ring |
q | replace if damaged |
26 - | Bottom radiator bearing |
27 - | Top radiator bearing |
28 - | 5 Nm |