skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Pistons and conrods > < Crankshaft

Octavia Mk2

Replace needle bearing for crankshaft
Replace needle bearing for crankshaft
Only on vehicles equipped with automatic gearbox.
Special tools and workshop equipment required
t  Centering mandrel -T30029 (3176)-
t  Interior extractor -Kukko 21/2-
t  Countersupport - Kukko 22/1-
Removing
   
–  Pull out needle bearing with interior extractor -Kukko 21/2- and countersupport -Kukko 22/1-.
Install
  Note
The marked side of the needle bearing should be legible when in its installed condition.
  V13-0903
–  Drive in the needle bearing using the centering pin -T30029-.
l  Fitting position: The marked side of the needle bearing should be legible when in its installed condition.
  S13-0332
Depth of installation of the needle bearing
l  Dimension -a-: 1.5 up to 1.8 mm
  V13-0428

Pistons and conrods > < Crankshaft