skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

2.0/81; 103; 125 kW TDI CR Engine (2nd generation) > < Ignition system - Summary of components
Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
t  Socket insert -T10370-
Removing
   
–  Disconnect plug -arrow- from engine speed sender -G28-.
–  Unscrew fixing screw of engine speed sender -G28- with socket insert -T10370 -.
–  Remove engine speed sender -G28- from cylinder block.
Install
–  Install engine speed sender -G28- and tighten the fixing screw to 5 Nm.
Further installation occurs in a similar way in reverse order to removal.
  A28-10062

2.0/81; 103; 125 kW TDI CR Engine (2nd generation) > < Ignition system - Summary of components