Octavia Mk2
Unit mounting - summary of components |
1 - | Engine support bracket |
2 - | 40 Nm + torque a further 180° (1/2 turn) |
q | replace |
3 - | Engine mounting |
4 - | 40 Nm + torque a further 90° (1/4 turn) |
q | replace |
5 - | Connecting part |
6 - | 20 Nm + torque a further 90° (1/4 turn) |
q | replace |
7 - | 20 Nm + torque a further 90° (1/4 turn) |
q | replace |
8 - | 40 Nm + torque a further 90° (1/4 turn) |
q | replace |
9 - | 60 Nm + torque a further 90° (1/4 turn) |
q | replace |
10 - | Pendulum support |
q | Removing: First remove screw -11-, then screws -12-. |
q | Installing: First tighten screws -12-, then screw -11-. |
11 - | 100 Nm + torque a further 90° (1/4 turn) |
q | replace |
12 - | Screws |
q | replace |
q | Strength category 8.8: 40 Nm + torque a further 90° (1/4 turn). |
q | Strength category 10.9: 50 Nm + torque a further 90° (1/4 turn). |
13 - | 60 Nm + torque a further 90° (1/4 turn) |
q | replace |
14 - | 40 Nm + torque a further 90° (1/4 turn) |
q | replace |
15 - | Gearbox mount |
16 - | Gearbox support bracket |
17 - | Screw |
q | Tightening torque → Gearbox; Rep. gr.34 |