skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Draining and filling up coolant > < Connection diagram for coolant hoses - Engines with identification characters CCSA, CHGA, CMXA
Vehicles with auxiliary heating.
   
Vehicles with auxiliary heating.
1 - Radiator
q   removing and installing → Chapter
q   fill with fresh coolant after replacing
2 - Coolant regulator
q   removing and installing → Chapter
q   check: heat up regulator in a water bath
q   Start of opening approx. 87 °C
q   End of opening approx. 102 °C
q   opening stroke at least 7 mm
3 - Coolant pump
q   removing and installing → Chapter
4 - Auxiliary heating
5 - Cylinder head/cylinder block
q   fill with fresh coolant after replacing
6 - Intake manifold with heating for throttle valve supports
7 - Expansion reservoir
q   Testing the pressure relief valve in the cap → Chapter
8 - Non-return valve
q   integrated into the coolant hose
q   not always visible from the outside
9 - Heat exchanger of heating system
q   fill with fresh coolant after replacing
10 - Coolant shut-off valve of heating system -N279-
11 - Gearbox oil cooler
q   only on vehicles with automatic gearbox

   

Draining and filling up coolant > < Connection diagram for coolant hoses - Engines with identification characters CCSA, CHGA, CMXA