skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the multi-function valve for the fuel tank > < Emptying and filling up gas line

Octavia Mk2

Closing the liquefied petroleum gas reservoir
Closing the liquefied petroleum gas reservoir
  Note
t  Observe safety measures and rules for cleanliness when working on vehicles with liquefied petroleum gas system (LPG) → Chapter.
t  The protective cover of the liquefied petroleum gas reservoir and the screws are sealed for safety reasons. When removing, do not damage any gasket and gasket rings.
   
–  Slacken the screws of the protective cover for the multi-function valve -arrows- and remove the cover -1-.
  S02-0567
–  Close off the mechanical shut-off valve -4- for the gas supply to the evaporator on the multi-function valve by turning clockwise as far as the stop.
–  Disconnect the plug -1- from the valve for gas tank -N495-.
  S20-0370
–  Attach the cap of the multi-function valve -1- with the screws -arrows-. Tighten screws to 2 Nm.
  S02-0567

Removing and installing the multi-function valve for the fuel tank > < Emptying and filling up gas line