skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Radiator and radiator fan > < Remove and install the left coolant pipe

Octavia Mk2

Removing and installing the right coolant pipe
Removing and installing the right coolant pipe
Special tools and workshop equipment required
t  Catch pan, e.g. -VAS 6208-
t  Hose clamps up to 25 mm -MP7-602 (3094)-
t  Pliers for spring strap clamps
Removing
–  Remove engine cover → Chapter.
   
–  Release screw -1-.
–  Release screw -2- and nut -3-.
–  Remove the hose bracket -4- from the fuel filter, lay the fuel filter -7- with the connected fuel hoses to the side.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Remove the right wheelhouse liner bottom part → Body Work; Rep. gr.66.
–  Place a catch pan -VAS 6208- under the engine.
  A20-10395
–  Disconnect plug -3- at the coolant temperature sender at radiator outlet -G83-.
–  Pinch off the coolant hoses with the hose clamps up to 25 mm -MP7-602- and remove from the right coolant pipe, to do so slacken the spring strap clamps -arrows-.
–  Release nut -1- and screw -2-, remove coolant pipe.
Install
Installation is performed in the reverse order, pay attention to the following points:
t  Tightening torques: → Chapter.
–  Install fuel filter → Chapter.
–  Top up coolant → Chapter.
  A19-10640

Radiator and radiator fan > < Remove and install the left coolant pipe