skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replace coolant temperature sender at radiator outletG83 > < Coolant pipes, coolant temperature sender, coolant pump - Summary of components

Octavia Mk2

Replace coolant temperature senderG62
Replace coolant temperature sender -G62-
Replace
l  Engine cold
–  Briefly open the cap of the coolant expansion reservoir in order to release the remaining pressure from the cooling system.
–  Remove the air filter housing → Chapter.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
For the vehicles Superb II up to 10.08
   
–  Unscrew screws -2 and 5- as well as screws -arrows-.
For the vehicles Octavia II, Superb II as of 11.08, Yeti
  A19-10641
–  Screw out screws -arrows- and screw -5-.
Continued for all vehicles
–  Release the screw clamp -3- and push the left charge air pipe as well as the left coolant pipe to the left.
  A21-10493
–  Disconnect plug -2- at the coolant temperature sender -G62-.
  Note
t  In order to collect flowing out coolant, place a cloth below the connection fitting.
t  Have a new coolant temperature sender -G62- with a new gasket ring ready.
–  Remove the retaining clip -1-, pull the coolant temperature sender -G62- out of the connection fitting and install a new coolant temperature sender -G62-.
Further installation occurs in reverse order.
–  Inspect coolant level, top up with coolant if necessary → Chapter.
  A19-10642

Replace coolant temperature sender at radiator outletG83 > < Coolant pipes, coolant temperature sender, coolant pump - Summary of components