Octavia Mk2
Connection diagram for coolant hoses |
1 - | Expansion reservoir |
q | with cap |
q | Test the pressure valve in the cap → Chapter |
2 - | Radiator for exhaust gas recirculation |
q | after replacing fill entire system with fresh coolant → Chapter |
q | removing and installing → Chapter |
3 - | to auxiliary heating |
4 - | from the auxiliary heating |
5 - | Cylinder block |
q | after replacing fill entire system with fresh coolant → Chapter |
6 - | Heat exchanger of heating system |
q | after replacing fill entire system with fresh coolant → Chapter |
7 - | Throttle aperture |
q | integrated in the coolant hose, not visible from the outside |
q | The fitting position is not defined, therefore the coolant hose must not be unclipped with the hose clamp (Risk of damage!) |
8 - | ATF radiator |
q | only for vehicles with automatic gearbox |
9 - | Coolant regulator |
q | only for vehicles with automatic gearbox |
10 - | Engine oil cooler |
q | after replacing fill entire system with fresh coolant → Chapter |
q | removing and installing → Chapter |
11 - | Coolant recirculation pump 2 -V178- |
q | removing and installing → Chapter |
12 - | Radiator |
q | for coolant |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant → Chapter |
13 - | Coolant temperature sender at radiator outlet -G83- |
14 - | 4/2 way valve with coolant regulator |
q | removing and installing → Chapter |
15 - | Coolant pump |
q | removing and installing → Chapter |
16 - | Cylinder head |
q | after replacing fill entire system with fresh coolant → Chapter |