| Adjust/replace dash panel insert |
Note | Before replacing the dash panel insert the code of the radio/navigation, which must be newly adjusted after replacing the dash panel insert, must be determined see → Chapter. |
| If the dash panel insert is replaced, the → Vehicle diagnostic tester must be connected before the removal of the original dash panel insert and must be confirmed in the guided functions „replace dash panel insert“. Thereby the required values must be read into the diagnostic unit from the original dash panel insert. If the original dash panel insert is not available or does not communicate with the diagnostic unit, then proceed according to the information in the → Vehicle diagnostic tester |
| After fitting the new dash panel insert, adapt all ignition keys. |
|
|
|
