General description

Make

Skoda

Model

Octavia Mk2

Section

Starter-current supply-CC › "Start-stop" system › General description

Vehicle electricsGeneral description

General description The start-stop system is designed to reduce fuel consumption and thus contributes to the reduction of pollutant emissions. For this purpose the engine automatically switches off during standstill phases of the vehicle and restarts automatically or when operating the clutch pedal. The system is always automatically activated when the ignition is switched on and can be deactivated with the „start-stop“ button in the centre console. Detailed description of the function as well as conditions for the operation of the start-stop system see: t  → No.86 t  → Owner's manual Octavia II Connection diagram of the start-stop system → Current flow diagrams, Electrical fault finding and Fitting locations.   Note t  The components adapted for the start-stop system are not specifically designated and differ only slightly from the usual components (e.g. starter, generator). t  When carrying out repairs, pay attention to the correct designation of the spare parts see → Electronic Catalogue of Original Parts.

05 General