| Adapting the functions of the vehicle voltage control unit -J519- |
| On the vehicle voltage control unit -J519- the following functions can be adapted: |
Note | The adaptability of the following functions depends on the equipment. |
| t
| Adapt Leaving Home Time |
| t
| Adapt visual acknowledgement when locking and unlocking |
| t
| Adapt acoustic acknowledgement when locking and unlocking |
| t
| Adapt sensitivity of interior monitoring |
| t
| Adapt sensitivity of vehicle inclination sender |
| t
| Adaptation of flash cycles for Convenience flashing |
| t
| Adapt key with radio remote control |
| t
| Adapt headlight wash intervals |
| Vehicles as of MY 2009 (Facelift) additionally: |
Note | Vehicles up to MY 2008 - the following functions can be adapted via the Convenience system central control unit -J393-. This control unit is no longer fitted as of MY 2009, the vehicle voltage control unit -J519- takes over its functions. |
| t
| adapt automatic locking at 15 km/h |
| t
| adapt automatic unlocking when the ignition key is removed |
| t
| adapt individual door opening |
| t
| adapt Convenience activation via radio remote control |
| t
| adapt country specific coding of the sounders |
| t
| deactivate factory mode |
| –
| Select operating mode „Targeted fault-finding“. |
| –
| Skip - Selected Functions/Components and then: |
| t
| 01 - Self-diagnosable systems |
| t
| Vehicle voltage control unit |
| Subsequently select the function to be adapted. |
|
|
|
