skoda Workshop Repair Guides

Skoda Workshop Manuals

< PREV PAGE NEXT PAGE >
Removing and installing steering angle senderG85
Removing and installing steering angle sender -G85-
  Note
The steering angle sender -G85- is integrated together with the coil spring into a housing.
A description of the structure and function of the steering angle sender -G85- can be found in self-study programme no. 42.
The steering angle sender is attached at the steering column switch.
Removing and installing:
→ Electrical System; Rep. gr.94 (Chapter: removing and installing the restoring ring with the slip ring from the steering column switch).
–  Then the basic setting of the steering angle sender -G85- must be performed → Vehicle diagnostic tester
   

Chassis > ABS, ADR, TCS, EDL, ESP > Removing and installing parts of the ESP System

< PREV PAGE NEXT PAGE >