Roomster
| Summary of components of brake-power regulator |
Note| t | After removing the brake lines close connection bores on the brake-power regulator with screw plugs. |
| t | Only remove the screw plugs of the connection bores immediately before installing the brake lines. |
WARNING
|
| 1 - | Brake-power regulator |
| q | load dependent |
| q | Assignment → Electronic Catalogue of Original Parts |
| q | inspecting, setting and adjusting values → Chapter |
| 2 - | Brake line with pipe screw |
| q | Tightening torque of the pipe screws: 14 Nm |
| 3 - | Screw, 21 Nm |
| 4 - | Self-locking nut, 21 Nm |
| q | replace after each removal |
| 5 - | Tension spring |
| 6 - | Screw, 16 Nm |
| 7 - | Socket nut |
| 8 - | Screw |
| q | replace after each removal |
