skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing coolant regulator > < Coolant pump and 4/2 way valve with coolant regulator - Summary of components

Roomster

Removing and installing coolant pump
Removing and installing coolant pump
Removing
–  Draining coolant:
t  Fabia II, Roomster, Rapid → Chapter.
t  Octavia II, Superb II, Yeti → Chapter.
–  Removing the toothed belt:
t  Fabia II, Roomster, Rapid → Chapter.
t  Octavia II, Superb II, Yeti → Chapter.
   
–  Release screws -1- and remove coolant pump -2-.
–  Remove O-ring -3-.
Install
Installation is performed in the reverse order, pay attention to the following points:
  Note
Replace O-ring.
–  Clean sealing surface for O-ring, if necessary smoothen.
  S19-0163
–  Moisten the new O-ring -3- with coolant.
–  Attach the coolant pump -2-.
l  Fitting position: Plug in housing points down.
–  Tighten screws -1- of coolant pump to 15 Nm.
–  Installing the timing belt:
t  Fabia II, Roomster, Rapid → Chapter.
t  Octavia II, Superb II, Yeti → Chapter.
–  Top up with coolant:
t  Fabia II, Roomster, Rapid → Chapter.
t  Octavia II, Superb II, Yeti → Chapter.
  S19-0163

Removing and installing coolant regulator > < Coolant pump and 4/2 way valve with coolant regulator - Summary of components