Superb
Note
|
| 1 - | 15 Nm |
| 2 - | Gasket ring |
| q | replace → Chapter |
| 3 - | Front sealing flange |
| q | must be positioned on dowel sleeves |
| q | removing and installing → Chapter |
| q | remove oil pan for removing and installing |
| 4 - | Cylinder block |
| q | removing and installing crankshaft → Chapter |
| q | Disassembling and assembling piston and conrod → Chapter |
| 5 - | 60 Nm + torque a further 1/4 turn (90°) |
| q | replace |
| 6 - | Flywheel |
| q | for removing and installing secure the flywheel using -MP 1-223- |
| 7 - | Intermediate plate |
| q | must be positioned on dowel sleeves |
| q | do not damage/bend during assembly work |
| 8 - | 15 Nm |
| 9 - | Sealing flange with sealing ring |
| q | must be replaced completely |
| q | use supporting sleeve supplied for installing |
| q | remove oil pan for removing and installing |
| q | Do not additionally lubricate or grease sealing lips of the gasket ring |
| q | before installing remove oil residues on crankshaft journal with a clean cloth |
| q | supporting sleeve must not be removed until after pushing sealing flange onto the crankshaft journal |
