Superb
|
1 - | 1.5 Nm |
2 - | Mounting cover |
3 - | 1.5 Nm |
4 - | Centre console |
q | Removing: |
– | Remove front seats → Chapter. |
– | Remove the extension of the centre console Pos. 10. |
– | Remove screws Pos. 9. |
– | Unclip frame Pos. 6 and transmission cover Pos. 7. |
– | Remove ashtray Pos. 8 |
– | Remove instrument panel → Chapter. |
– | Remove screws Pos. 1 and take off assembly cover Pos. 2. |
– | Remove screws Pos. 3. |
– | Lever out clamps Pos. 5 and remove console. |
q | Installing: |
Installation is carried out in the reverse order. |
5 - | Clamp |
6 - | Surround |
7 - | Transmission cover |
q | removing and installing → Pos. 4 |
8 - | Ashtray |
q | removing and installing → Chapter |
9 - | 1.5 Nm |
10 - | Extension of the centre console |
q | Removing: |
– | Remove rear support Pos. 14. |
– | Unclip storage compartment Pos. 11. |
– | Remove air guide Pos. 12. |
– | Remove nuts Pos. 21. |
– | Take off handbrake cover. |
– | Pull on the handbrake and push out extension of centre console. |
q | Installing: |
Installation is carried out in the reverse order. |
11 - | Storage tray |
12 - | Air deflector |
13 - | Rear seat heating control |
14 - | Rear support |
q | Removing: |
– | Remove rear ashtray Pos. 18. |
– | Take out ashtray and unclip rear frame Pos. 16. |
– | Disconnect plug connections from the rear seat heating control Pos. 13. |
– | Remove screws Pos. 20 and push out rear trim panel. |
q | Installing: |
Installation is carried out in the reverse order. |
15 - | Cigarette lighter |
16 - | Rear surround |
17 - | Socket |
18 - | Ashtray |
19 - | Rear air vents |
20 - | 1.5 Nm |
21 - | 10 Nm |