Skoda Workshop Service and Repair Manuals > Superb > Body | Body Work | Rear door,sliding door,wing doors,central locking | Rear door

Removing and installing the door lock

The door lock can only be removed together with the assembly carrier.

Removing

–	Removing the door handle → Chapter.

–	Remove assembly carrier → Chapter and take out together with the door lock.

–	Remove the door lock from the assembly carrier in the same way as you removed it for the door at the front → Chapter.

Install

–	Pull out the control lever -1- in -the direction of the arrow-.

–	Using a screwdriver expand the spring fitted to the door lock -2- in -the direction of the arrow- and hook the lock lever to the spring.

Note

The lock is blocked once the control lever is hooked on. This prevents the Bowden cable from being “incorrectly” clipped at a later stage.

Further installation occurs in reverse order.

Note

Perform a functional check because the door cannot be opened if the adjustment is not accurate and the Bowden wire is not clipped on correctly.

Skoda Workshop Service and Repair Manuals