Superb
| Removing and installing parts of the charge air cooling |
Note| t | All hose connections must be secured with corresponding hose clips. |
| t | The charge-air system must be tight. |
| 1 - | Charge air cooler |
| 2 - | Retaining clip |
| 3 - | O-ring |
| q | black |
| q | replace |
| 4 - | Connecting hose |
| 5 - | Rubber grommet |
| 6 - | Bush |
| 7 - | 10 Nm |
| 8 - | O-ring |
| q | replace if damaged |
| 9 - | Intake manifold pressure sender -G71- with intake manifold temperature sender -G72- |
| 10 - | 3 Nm |
| 11 - | to induction pipe |
| 12 - | Retaining clip |
| q | check tightness |
| 13 - | Connecting hose |
| 14 - | Charge air pipe |
| 15 - | Connecting hose |
| 16 - | O-ring |
| q | green |
| q | replace |
| 17 - | from turbocharger |
| 18 - | Cross tube |
| 19 - | Connecting hose |
