Superb
| Installing and removing ATF lines in vehicles with 4 cylinder engines |
| 1 - | 20 Nm |
| q | before tightening, insert the line by hand up to the stop |
| 2 - | ATF line |
| q | to ATF radiator |
| q | Pay attention to inscription at gearbox housing |
| 3 - | ATF line |
| q | from radiator |
| q | Pay attention to inscription at gearbox housing |
| 4 - | O-ring |
| q | insert with ATF |
| q | always replace → Electronic Catalogue of Original Parts |
| 5 - | O-ring |
| q | insert with ATF |
| q | always replace → Electronic Catalogue of Original Parts |
| 6 - | 5 Nm |
| q | before tightening, insert the line by hand up to the stop |
| 7 - | O-ring |
| q | insert with ATF |
| q | always replace → Electronic Catalogue of Original Parts |
| 8 - | 5 Nm |
| q | before tightening, insert the line by hand up to the stop |
| 9 - | Union nut, 30 Nm |
| 10 - | Support |
| 11 - | Screw |
| q | does not have to be unscrewed in order to remove and install the ATF lines. |
| 12 - | 5 Nm |
| 13 - | Clamp |
| 14 - | Support |
| q | to engine/gearbox support |
