skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Anti-theft warning system > < Additional brake light
Removing and installing additional brake light
Removing and installing additional brake light
The additional brake light is built into the rear part of the rear window shelf, behind the rear seats.
Removing
   
–  Unplug the connector -1- and unclip the additional brake light -arrows-.
–  Remove the additional brake light.
Install
–  Carry out the installation in the same way in reverse order.
  Note
The additional brake light does not have a bulb but is fitted instead with LEDs. Replacement of the individual LEDs is not possible so the brake light must be replaced as a complete unit in the case of repairs.
  S94-0136

Anti-theft warning system > < Additional brake light