| Connect vehicle diagnosis, measurement and information system VAS 505x |
Note | Observe the current operating instructions for → Vehicle diagnostic tester, which is displayed after selecting the buttons „Administration“ and „Operating manual“. |
| Special tools and workshop equipment required |
| t
| corresponding diagnostic cable |
| –
| On vehicles with manual gearbox, shift the gearshift lever into neutral position. |
| –
| On vehicles with automatic gearbox, shift selector lever in „P“ or „N“ position. |
| –
| When the ignition is switched off, connect the → Vehicle diagnostic tester with the corresponding disgnostic cable at vehicle diagnostic connection. |
| –
| Switch off all electrical components. |
|
|
|
