| General instructions for the repair on the vehicle electrics |
WARNING | t
| Pay attention to the stickers affixed to the vehicle which indicate components with high voltage. The remaining voltage must be discharged when undertaking repair work (e.g. switch the consumer on and off again after disconnecting the battery). |
| t
| Some tools have a tool locking element which must be pushed over the tip of the tool after use, in order to protect the employee from injury and the tool tip from damage. |
|
Caution | t
| Country-specific regulations must be observed. |
| t
| Before starting a repair, it is absolutely necessary to eliminate the cause of the damage (e.g. sharp-edged body parts, defective consumers, corrosion etc.). |
|
Note | t
| If possible, do not loosen any earth straps from the body (risk of corrosion). |
| t
| When carrying out repairs, observe the current instructions in the relevant Workshop Manuals. |
|
|
|
