–
| Disconnect the plug connector -1- from the airbag unit. |
–
| Connect the connecting cable -VAS 5094- onto the airbag. |
–
| Reinstall the airbag. The connecting cable lies between the airbag unit and the steering wheel. |
–
| Connect up the ignition system -V.A.G 1821- using the cable connector on the connecting cable. |
–
| Lay the ignition system through the gap in the door and connect to the external battery. |
–
| Ignite the airbag unit and dispose of it as scrap. |
Igniting the side airbag on the front seat passenger's side |
–
| Remove the glove compartment on front passenger's side → Chapter. |
–
| Disconnect the airbag unit plug connector. |
–
| Connect the connecting cable -VAS 5232- onto plug connector of the airbag. |
–
| Connect up the ignition system -V.A.G 1821- using the cable connector on the connecting cable. |
–
| Lay the ignition system through the gap in the door and connect to the external battery. |
–
| Ignite the airbag unit and dispose of it as scrap. |
Ignite the side airbag units |
–
| Disconnect the airbag plug connector below the front seat. |
–
| Connect the connecting cable -VAS 5232- onto plug connector of the airbag. |
–
| Connect up the ignition system -V.A.G 1821- using the cable connector on the connecting cable. |
–
| Lay the ignition system through the gap in the door and connect to the external battery. |
–
| Ignite the airbag unit and dispose of it as scrap. |
Ignite the rear side airbag units |
–
| Removing side trim panel in luggage compartment → Chapter. |
–
| Disconnect the airbag unit plug connector. |
–
| Connect the connecting cable -VAS 5232- onto plug connector of the airbag. |
–
| Connect up the ignition system -V.A.G 1821- using the cable connector on the connecting cable. |
–
| Lay the ignition system through the gap in the door and connect to the external battery. |
–
| Ignite the airbag unit and dispose of it as scrap. |
–
| Disconnect the airbag unit plug connector. |
–
| Connect the connecting cable -VAS 5232- onto plug connector of the airbag. |
–
| Connect up the ignition system -V.A.G 1821- using the cable connector on the connecting cable. |
–
| Lay the ignition system through the gap in the door and connect to the external battery. |
–
| Ignite the airbag unit and dispose of it as scrap. |
Dispose of belt tensioner |
–
| Disconnect the plug connection on the belt tightener. |
–
| Connect the connecting cable -VAS 5094- onto plug connector of the belt tensioner. |
–
| Connect up the ignition system -V.A.G 1821- using the cable connector on the connecting cable. |
–
| Lay the ignition system through the gap in the door and connect to the external battery. |
–
| Ignite the belt tensioner. |
|
|
|