| Changing the brake pads of the front brake - Mounting instructions |
| When changing the pad, observe the following: |
| –
| Check the protective collar of the piston for brake caliper. |
| Replace the protective collar if damaged. |
| When replacing the collar: |
| –
| Check the contact surfaces of the brake piston and the brake caliper for any dirt (oxydation). |
| Carefully clean the piston as well as the brake caliper if dirty and replace the sealing sleeve. |
| –
| Check the brake piston and the brake caliper (corrosion, grooves on the outside of the cylinder surface), replace the brake caliper completely if damaged. |
| For the piston of the brake caliper, press into the initial position: |
| –
| Check if the piston can be slightly pressed into the brake caliper. |
| If the piston cannot be slightly pressed into the brake caliper: |
| –
| Check and clean the brake piston as well as the brake caliper, replace sealing sleeve and protective collar. |
| Replace the brake caliper completely if damaged. |
|
|
|
