skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Air conditioning system with refrigerant R134a > < Description of the function

Yeti

Removing and installing the air quality sensorG238
Removing and installing the air quality sensor -G238-
Removing
–  Remove the right side of the plenum chamber cover → Body Work; Rep. gr.64.
–  Remove the air inlet cover of the air conditioning system.
   
–  Unplug the plug -1- from the air quality sensor -G238-.
–  Release the catch -2- and rotate the air quality sensor -G238--3- by 90° and remove.
Install
Installation is carried out in the reverse order.
  Note
Do not place a removed sensor in areas where it can come into contact with solvents, petrol and certain chemical compounds (liquids or vapours). This would result in permanent damage of the sensor.
  S87-0327

Air conditioning system with refrigerant R134a > < Description of the function