| Top up rear final drive with oil |
| –
| Place a catch pan under the rear final drive. |
| –
| Fill up with as much oil as possible using the filling device -VAS 6291- or -VAS 6291A- until it flows out between the adapter of the filling device and the final drive housing. |
| –
| Remove filling device and adapter. Some excess oil might still drain off. |
| Oil is at the correct level if the rear final drive is filled up to the lower edge of the oil filler hole. |
| –
| Screw in new screw -1- and tighten to 15 Nm |
|
|
|
