skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing clutch make ?Sachs? > < Repairing clutch

Yeti

Removing
Removing
–  Removing the gearbox.
t  Remove gearbox - front-wheel drive (Octavia II and Superb II) → Chapter.
t  Remove gearbox - four-wheel drive (Octavia II and Superb II) → Chapter.
t  Remove gearbox - front-wheel-drive (Yeti) → Chapter.
t  Remove gearbox - four-wheel-drive (Yeti) → Chapter.
In order to avoid a deformation of the pressure plate when removing it (this leads to jerking during start-up), the pressure plate must be loosened as follows:
–  Insert counterholder -MP1-223- to slacken the bolts.
   
–  Release bolts in small stages crosswise.
l  When unscrewing, the stop must slacken -2- together with the bolt -1-.
–  If the stop does not slacken: Press bolt in the direction of the flywheel.
–  Remove pressure plate and clutch disc.
  S30-0147

Removing and installing clutch make ?Sachs? > < Repairing clutch