Yeti
| Disassembling and assembling gearshift forks up to 05.09 (Superb II and Yeti) |
Note| t | The reverse gear shift fork Pos. 5 is positioned on the shaft for reverse gear shift fork in the clutch housing. |
| t | Fitting position of gearshift forks and gear shift rods in the gearbox → Fig.. |
| 1 - | Rubber insulation |
| q | can be pulled out of the gear shift rod and inserted by hand |
| 2 - | Gear shift rod with shift fork for 1st and 2nd gear |
| 3 - | Gear shift rod with shift fork for 3rd and 4th gear |
| 4 - | Gear shift rod with shift fork for 5th and 6th gear |
| 5 - | Gearshift fork reverse gear |
