Yeti
|
| 1 - | Differential pressure sender -G505- |
| 2 - | Fuel pressure sender -G247- |
| 3 - | Hall sender -G40- (camshaft position sensor) |
| 4 - | Injection units (piezo injectors) |
| 5 - | Engine control unit |
| 6 - | lambda probe -G39- with heating for lambda probe -Z19- |
| 7 - | Position sender for charge pressure regulator -G581- |
| 8 - | Exhaust gas return valve -N18- |
| q | consists of: |
| t | mechanical valve (electrically operated) |
| t | EGR control motor -V338- |
| t | EGR potentiometer -G212- |
| 9 - | Solenoid valve for charge pressure control -N75- |
| 10 - | Connector |
| q | for exhaust gas temperature sender 4 -G648- |
| q | for exhaust gas temperature sender 1 -G235- (Temperature sender upstream turbocharger -G507-) |
| q | for lambda probe -G39- |
| 11 - | Air mass meter -G70- |
| 12 - | Fuel filter |
| 13 - | Coolant temperature sender at radiator outlet -G83- |
| 14 - | Fuel temperature sender -G81- |
| 15 - | High pressure pump with fuel dosage valve -N290- |
| 16 - | Charge pressure sender -G31- with intake air temperature sender -G42- |
| 17 - | Connection of fuel feed line (high pressure line) |
| 18 - | Coolant recirculation pump 2 -V178- |
| 19 - | Connection of fuel feed line from fuel filter |
| 20 - | Throttle valve control unit -J338- |
| 21 - | Changeover valve for radiator of exhaust gas recirculation -N345- |
| 22 - | Engine speed sender -G28- |
| 23 - | Glow plugs |
| q | Glow plug 1 -Q10- |
| q | Glow plug 2 -Q11- |
| q | Glow plug 3 -Q12- |
| q | Glow plug 4 -Q13- |
| 24 - | Control valve for fuel pressure -N276- |
| 25 - | Intake manifold flap motor -V157- |
| q | only on vehicles with intake manifold flap → Chapter |
| q | the function is not used |
