skoda Workshop Repair Guides

Skoda Yeti Workshop Service & Repair Manuals - Get Yours Now!

Parts of cooling system on the side next to the body - Summary of components > < Testing oil pressure
Cooling system
Cooling system
  WARNING
Hot steam may escape when the coolant expansion reservoir is opened. Wear safety goggles and safety clothing, in order to avoid eye injuries and scalding. Cover the cap with a cloth and open carefully.
  Note
t  When the engine is warm the cooling system is under pressure. If necessary reduce pressure before repairs.
t  The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips → electronic catalogue of original parts.
t  Use pliers for spring strap clamps to fit the spring strap clips.
t  Always replace seals and gasket rings.
t  When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection).
t  The arrows which are on the coolant pipes and the coolant hose ends must stand opposite to each other.
   

Parts of cooling system on the side next to the body - Summary of components > < Testing oil pressure