Impreza L Sedan F4-2.2L SOHC (1997)
9. Loosen the coil spring carefully.
10. Using hexagon wrench to prevent strut rod from turning, tighten self-locking nut with ST. Tightening torque: 49 + 10 or - 0 Nm (36 + 7 or - O
ft.lbs.)
INSTALLATION
1. Install upper strut mount at upper side of strut to body and tighten with nuts. Tightening torque: 20 ± 6 Nm (14.5 ± 4.3 ft.lbs.).
2. Install ABS sensor harness to strut. (ABS equipped models) Tightening torque: 152 ± 20 Nm (112 ± 14 ft.lbs.).
3. Position aligning mark on camber adjustment bolt with aligning mark on lower side of strut. Tightening torque: 152 ± 20 Nm (112 ± 14 ft.lbs.).
CAUTION:
^
While holding head of adjusting bolt, tighten self locking nut.
^
Be sure to use new self-locking nut.
4. Install brake hose at lower side of strut with clamp.
5. Install union bolts which secure brake caliper to brake hose. Tightening torque: 18 ± 3 Nm (13.0 ± 2.2 ft.lbs.)
CAUTION: Be sure to bleed air from brake system.
6. Install wheels.
NOTE: Check wheel alignment and adjust if necessary.