subaru Workshop Repair Guides

Subaru Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 9
background image

8. Install the shift lever.

NOTE:  Apply grease to the contact portion of the shift lever.

Grease: DENSO HL50

9. Install the starter housing, and tighten the through bolts on both sides.

Tightening torque: 6 N.m (0.6 kgf.m, 4.4 ft.lb)

Starting and Charging > Starting System > Starter Motor > Component Information > Service and Repair > Removal and Replacement > Page 4420

< PREV PAGE NEXT PAGE >